Auto >> AutoSPT >  >> Engine

What is the wheel bolt pattern size for a 2001 Ford Ranger?

The wheel bolt pattern for a 2001 Ford Ranger depends on the specific model and trim level. There are two common patterns:

* 5x4.5" (5x114.3mm): This is the *most common* bolt pattern for a 2001 Ford Ranger.

* 5x5" (5x127mm): This pattern is *less common* but was used on some 2001 Ranger models, particularly those with larger wheels or off-road packages.

To be absolutely certain, you must check one of the following:

* Your vehicle's owner's manual: This will definitively state the correct bolt pattern.

* The sticker on your driver's side doorjamb: This sticker usually contains tire size and other important vehicle information, including the bolt pattern.

* The wheel itself: The bolt pattern is visible on the wheel.

* Your existing wheel: Measure the distance between two bolts, then multiply by two.

Do not rely solely on online resources to determine this, as there's a chance of inaccuracies. Always double-check using one of the methods listed above.