* Near the driver's seat: Look under the dash, near the steering column, or on the lower part of the dashboard itself. There might be a lever, a button, or a small pull handle.
* On the driver's side door panel: Some models place the release on the door panel, often near the bottom.
* On the center console: A less common location, but possible, is a release mechanism located within the center console.
To find it, try these steps:
1. Consult your owner's manual: This is the best place to start. The manual will have a diagram showing the location of the hood release.
2. Look for a small lever or button: Systematically check the areas mentioned above. The release might be marked with an image of an engine or a hood.
3. Feel around carefully: The release might be a small, unlabeled lever or button that's hard to see.
If you can't find it after checking these areas, consider contacting your RV's dealer or searching for online forums specific to your Bounder Workhorse model year. Providing the year of your RV will help others provide more specific advice.
