Where is the pcv valve on a 1999 Chrysler Sebring V6 non-turbo fuel injected engine?

The PCV valve on a 1999 Chrysler Sebring V6 (3.0L) is typically located on the valve cover. However, it's not always in the same exact spot across all engine variations. It's usually a small, usually black, plastic or metal valve with a hose connected to it. Sometimes it's a bit difficult to see because it's tucked in somewhat.

To find it, you'll need to:

1. Locate the valve cover: This is the top of the engine, a relatively large, rectangular-shaped part.

2. Look for hoses: The PCV valve will have at least one hose connected to it, usually a small diameter hose. Follow these hoses to find the valve.

3. Consult a repair manual: A repair manual specific to your 1999 Chrysler Sebring V6 (3.0L) will have a diagram showing the exact location of the PCV valve. This is the most reliable way to find it.

Important Note: Before attempting to locate or replace the PCV valve, make sure the engine is completely cool to avoid burns.