1. Gather tools and materials. You will need:
- New starter
- Starter mounting bolts
- Wrench set
- Socket set
- Screwdriver
- Extension cord
2. Prepare the car.
- Turn off the engine and allow it to cool down completely.
- Set the parking brake and chock the wheels.
- Disconnect the negative battery terminal.
3. Locate the starter.
- The starter is located on the driver's side of the engine, near the top. It is cylindrical, about the size of a soda can, and has two terminals on the back.
4. Remove the old starter.
- Disconnect the two electrical terminals on the back of the starter.
- Remove the starter mounting bolts.
- Remove the old starter from the car.
5. Install the new starter.
- Place the new starter in position.
- Install the starter mounting bolts and tighten them securely.
- Connect the two electrical terminals to the back of the starter.
6. Test the starter.
- Connect the negative battery terminal.
- Turn the ignition key to the "start" position. The starter should engage and turn the engine over.
7. Reattach the battery.
- Once you are sure the starter is working properly, reattach the negative battery terminal.
Here are some additional tips for replacing a starter on a 1993 Ford Mustang:
* Make sure that the new starter is compatible with your car.
* If you are uncomfortable working on electrical components, you may want to have the starter replaced by a qualified mechanic.
* Be careful not to drop the starter when removing or installing it.
