- A mild detergent
- Warm water
- A soft cloth
- A mild abrasive cleaner (such as Bon Ami)
- A cotton swab
- A can of clear lacquer
1. Clean the Bakelite steering wheel boss horn assembly with a mild detergent and warm water. Be sure to remove all dirt and grime.
2. Dry the Bakelite steering wheel boss horn assembly with a soft cloth.
3. Apply a mild abrasive cleaner (such as Bon Ami) to the Bakelite steering wheel boss horn assembly with a cotton swab. Rub the cleaner in a circular motion until the colour and finish are restored.
4. Wipe off the cleaner with a soft cloth.
5. Spray the Bakelite steering wheel boss horn assembly with a can of clear lacquer. This will help to protect the finish and keep it from fading or chipping.
Allow the lacquer to dry completely before reinstalling the Bakelite steering wheel boss horn assembly on your car.
Here are some additional tips for restoring the colour and finish on an old classic car Bakelite steering wheel boss horn assembly:
* If the Bakelite is severely discoloured or damaged, you may need to sand it down before applying a new finish.
* Be sure to test the cleaner on a small area of the Bakelite before applying it to the entire assembly.
* Work in a well-ventilated area when using the cleaner and lacquer.
* Wear gloves to protect your hands.
