Tools and Materials:
* Flathead screwdriver
* Phillips head screwdriver
* New low beam headlight bulb (Philips part number 9006BVS2, or equivalent)
Instructions:
1. Park your vehicle in a safe location and turn off the engine. Allow the vehicle to cool down if it has been running for a while, as you will be working near the engine.
2. Open the hood of your vehicle.
3. Locate the low beam headlight bulb on the driver's side of the vehicle. It is located behind the headlight assembly, and is accessible through a small opening in the back of the assembly.
4. Use the flathead screwdriver to release the retainer clip that holds the low beam headlight bulb in place.
5. Once the retainer clip is released, you can use the Phillips head screwdriver to remove the low beam headlight bulb from the assembly.
6. Insert the new low beam headlight bulb into the assembly, and tighten it in place with the Phillips head screwdriver.
7. Replace the retainer clip, and close the hood of your vehicle.
8. Repeat steps 4-7 on the passenger side of the vehicle to replace the low beam headlight bulb.
