1. Stop Using the Blower:
• Turn the blower off and disconnect it from the power source.
2. Drain the Fuel:
• Locate the fuel drain valve or drain plug on the blower.
• Open the valve or remove the plug to allow the gas mixture to drain out.
• Empty the fuel into a suitable container.
3. Clean the Carburetor:
• You'll need to clean the carburetor to remove any gas residue and prevent engine problems.
• If you are comfortable working on small engines, you can follow the steps in the owner's manual to disassemble the carburetor and clean it thoroughly with carburetor cleaner.
• Consult a professional if you're unsure about disassembling the carburetor.
4. Replace or Clean Spark Plug:
• Removing the spark plug can help release any fuel that may have entered the cylinder.
• Check the spark plug for fouling and replace it if necessary. A fouled spark plug may not ignite the fuel-oil mixture properly.
5. Reassemble the Blower:
• Once the carburetor and spark plug are cleaned or replaced, reassemble the blower according to the owner's manual.
6. Use the Correct Fuel Mixture:
• When refilling the blower, ensure that you use the correct fuel mixture as specified in the owner's manual.
• Typically, oil and leaf blowers require a mixture of unleaded gasoline and 2-cycle engine oil in a specific ratio.
7. Test the Blower:
• After reassembling the blower and using the correct fuel mixture, try starting the blower.
• If the engine starts and runs smoothly, then the gas has been successfully removed.
8. Seek Professional Help if Needed:
• If the blower doesn't start or you encounter any issues during the process, consider seeking assistance from a qualified small engine mechanic or repair shop.
Remember that putting gas in an oil and leaf blower is not recommended and can lead to engine damage or safety hazards. Always consult the owner's manual for proper fuel and maintenance guidelines.
