Remove the trim around the heater controls. This can usually be done by using a small pry tool to gently pry the trim away from the dashboard.
Once the trim is removed, you will see the heater control panel. The light bulb is located in the center of the panel.
Use a Phillips head screwdriver to remove the screw that holds the light bulb in place.
Once the screw is removed, you can remove the light bulb from the socket.
Replace the light bulb with a new one. Make sure that the new light bulb is the same size and wattage as the old one.
Replace the screw and the trim, and you're done!
Here are a few additional tips for replacing the heater control panel light on a Citroen Berlingo:
Be careful not to damage the trim when you are removing it.
If the screw is difficult to remove, you can try using a pair of pliers to loosen it.
When replacing the light bulb, make sure that it is properly seated in the socket.
If you have any questions or concerns, consult your vehicle's owner's manual or a qualified mechanic.
