Tools and Materials:
- Door Slider Kit (specific to your T4 VW model)
- Drill
- Rivets or Bolts (depending on the kit)
- Screwdriver
- Measuring Tape
- Pencil
Step-by-Step Guide:
1. Remove the Old Door Slider:
- Open the door and locate the existing door slider.
- Remove any screws or rivets that hold the old slider in place.
- Carefully remove the old slider from the door.
2. Prepare the Door:
- Clean the area where the old slider was installed to remove any dirt or debris.
- Ensure the surface is smooth and free from any obstructions.
3. Measure and Mark the Door:
- Use the measuring tape to mark the position for the new door slider.
- Refer to the door slider kit instructions for recommended placement.
4. Drill Holes:
- Using the marks as a guide, drill holes for the rivets or bolts.
- Make sure the holes are the correct size and depth specified in the kit instructions.
5. Install the Door Slider:
- Position the new door slider over the drilled holes.
- Insert the rivets or bolts into the holes and tighten them securely.
6. Attach the Sliding Track:
- Some kits include a sliding track that needs to be attached to the door.
- Follow the instructions provided with your kit to install the sliding track.
7. Test and Adjust:
- Slide the door open and closed several times to ensure smooth operation.
- Make any necessary adjustments to the slider or sliding track if needed.
8. Reinstall the Door:
- Hang the door back onto its hinges and secure it in place.
- Check that the slider functions correctly when opening and closing the door.
Note:
- The process may vary slightly depending on the specific model and year of your T4 VW, so it's always a good idea to refer to the specific instructions provided with your door slider kit.
- If you are unsure about any part of the installation, it's recommended to consult with a professional mechanic or seek assistance from someone experienced with vehicle modifications.
