WARNING: Working on a car's engine can be dangerous. Some steps within this guide may require special tools and knowledge for your own safety.
___
#### 1. Disconnect the negative battery cable.
#### 2. Remove the air filter.
#### 3. Drain the cooling system.
#### 4. Remove the fan shroud.
#### 5. Remove the radiator hoses.
#### 6. Remove the heater hoses.
#### 7. Disconnect the fuel lines.
#### 8. Disconnect the throttle linkage.
#### 9. Disconnect the vacuum lines.
#### 10. Remove the starter motor.
#### 11. Remove the flywheel cover.
#### 12. Remove the clutch (if applicable).
#### 13. Disconnect the transmission from the engine.
#### 14. Remove the engine mounts.
#### 15. Lift the engine out of the car.
Here are some additional tips for removing the 4.2 engine from an Jaguar XJ6 Automatic Series 1:
- Make sure that you have all of the necessary tools and supplies before you begin.
- Follow the steps carefully in order to avoid damage to the engine or the car.
- If you are not comfortable performing this task, you can take your car to a mechanic to have it done.
