- A Phillips head screwdriver
- A flat head screwdriver
- A new standing lamp
Instructions:
1. Park your car in a safe location and turn off the engine.
2. Open the hood of your car.
3. Locate the standing lamp that you need to replace. It is located on the side of the headlight assembly.
4. Use the Phillips head screwdriver to remove the two screws that hold the standing lamp in place.
5. Once the screws are removed, use the flat head screwdriver to pry the standing lamp out of the headlight assembly.
6. Disconnect the electrical connector from the standing lamp.
7. Connect the electrical connector to the new standing lamp.
8. Insert the new standing lamp into the headlight assembly.
9. Secure the standing lamp with the two screws that you removed earlier.
10. Close the hood of your car.
The standing lamp has been replaced.
