* Ignition Coil Failure:*
- Check the ignition coils for proper function.
- If a coil is faulty, replace it.
* Spark Plug Issues:*
- Inspect spark plugs for damage, wear, or fouling.
- Clean or replace spark plugs as necessary.
- Ensure proper gap according to the manufacturer's specifications.
* Distributor Cap/Rotor Problems:*
- Check the distributor cap and rotor for cracks, carbon buildup, or damage.
- Replace the distributor cap and rotor if needed.
* Ignition Module Failure:*
- Test the ignition module for proper function.
- Replace the ignition module if it's faulty.
* Bad Wiring or Connections:*
- Check the wiring related to the ignition system for loose connections, damage, or corrosion.
- Clean or repair any faulty connections.
* Faulty Crank or Cam Sensors:*
- Check the crank and cam sensors for proper operation.
- If a sensor is faulty, replace it.
* On-Board Diagnostics:*
- Use an OBD-II scanner to retrieve any diagnostic trouble codes (DTCs) related to the ignition system.
- Address any underlying issues indicated by the codes.
