1. Turn on the master and ignition switches. This will turn on the electrical system and ignite the spark plugs.
2. Set the throttle to fully open. This will allow maximum airflow through the engine and help to cool it down.
3. Activate the starter. This will start the engine and begin to spin the propeller.
4. As soon as the engine starts, close the throttle to a low setting. This will help to reduce the engine speed and prevent it from overheating.
5. Let the engine run for a few minutes at low speed to allow it to cool down. This will help to prevent damage to the engine.
6. Once the engine has cooled down, you can increase the throttle setting to your desired setting.
Tips for a successful hot start:
* Make sure that the engine is properly primed before starting.
* Avoid over-priming the engine, as this can lead to flooding.
* If the engine does not start after a few attempts, allow it to cool down for a few minutes before trying again.
* Do not attempt to start the engine with the throttle set too high, as this can damage the engine.
* Have a fire extinguisher nearby in case of a fire.
