- Pliers
- 10mm Wrench
- Gasoline Container
Instructions:
1. Park your Grizzly 660 ATV on a flat surface. Turn off the engine and allow it to cool down.
2. Remove the saddle bags by popping the two clips holding the saddle bags to the frame.
3. Locate the fuel drain bolt. It is located on the bottom of the fuel tank, in-between the two frame rails.
4. Place the gas container under the fuel drain bolt.
5. Use the 10mm wrench to remove the drain bolt and allow the gasoline to drain into the container.
6. Reinstall the fuel drain bolt once all of the gasoline has drained from the tank.
7. Put the saddle bags back on by snapping the clips into place.
