Can you run a rototiller with to35 Massey Ferguson tractor?

The Massey Ferguson TO35 is a versatile and powerful tractor that is capable of handling a variety of tasks, including rototilling. To use a rototiller with a TO35 tractor, you will need to attach the rototiller to the tractor's three-point hitch. The three-point hitch is a hydraulic system that allows you to raise and lower the rototiller, as well as control its depth of penetration into the soil.

To attach a rototiller to a TO35 tractor, follow these steps:

1. Park the tractor on level ground and turn off the engine.

2. Engage the parking brake.

3. Lower the three-point hitch arms to their lowest position.

4. Connect the rototiller's top link to the tractor's top link pin.

5. Connect the rototiller's lower links to the tractor's lower link pins.

6. Tighten the nuts and bolts that secure the rototiller to the tractor.

Once the rototiller is attached to the tractor, you can raise the three-point hitch arms to lift the rototiller off the ground. You can then start the tractor and engage the rototiller's power take-off (PTO). The PTO will drive the rototiller's blades, which will rotate and break up the soil.

To control the depth of penetration of the rototiller, use the tractor's hydraulic levers to raise or lower the three-point hitch arms. The higher the three-point hitch arms are raised, the shallower the rototiller will penetrate the soil. The lower the three-point hitch arms are lowered, the deeper the rototiller will penetrate the soil.

To stop the rototiller, disengage the PTO and lower the three-point hitch arms to their lowest position. Then, turn off the tractor and engage the parking brake.