Auto >> AutoSPT >  >> Engine

Harley Davidson heritage classic shuts down while under power Everything goes out After a couple of minutes it will re-fire Ignition switch is hot to the touch?

There are a few potential causes for this issue:

* Bad ignition switch: If the ignition switch is bad, it may not be able to properly supply power to the motorcycle's electrical system. This could cause the motorcycle to shut down while under power.

* Bad battery: If the battery is bad, it may not be able to provide enough power to the motorcycle's electrical system. This could also cause the motorcycle to shut down while under power.

* Bad voltage regulator: The voltage regulator is responsible for regulating the voltage of the motorcycle's electrical system. If the voltage regulator is bad, it may not be able to properly regulate the voltage, which could cause the motorcycle to shut down while under power.

* Bad wiring: If the wiring is bad, it may not be able to properly supply power to the motorcycle's electrical system. This could also cause the motorcycle to shut down while under power.

To troubleshoot this issue, you will need to check the following:

* Check the ignition switch. Make sure that the ignition switch is properly connected and that there is no damage to the wiring.

* Check the battery. Check the battery's voltage and make sure that it is within the manufacturer's specifications.

* Check the voltage regulator. Check the voltage regulator's output voltage and make sure that it is within the manufacturer's specifications.

* Check the wiring. Check the wiring for any damage or corrosion.

If you find any problems with any of these components, you will need to replace them.

Here are some additional tips that may help you troubleshoot this issue:

* If the motorcycle is shutting down while under power, try turning off the ignition switch and then turning it back on. This may reset the electrical system and allow the motorcycle to start again.

* If the motorcycle is shutting down while under power and the ignition switch is hot to the touch, this may indicate that there is a short circuit in the electrical system. You will need to find the short circuit and repair it.

If you are unable to troubleshoot this issue yourself, you will need to take your motorcycle to a qualified mechanic.