2. Fuel Filter: The fuel filter is located inside the fuel tank. It is a small, cylindrical-shaped piece of plastic with a screen on the inside. The fuel filter helps to keep dirt and debris out of the fuel system.
3. Fuel Line: The fuel line connects the fuel tank to the carburetor. It is a small, flexible hose that is made of rubber or plastic.
4. Carburetor: The carburetor is located on the left side of the saw. It is a device that mixes air and fuel together to create a combustible mixture.
5. Spark Plug: The spark plug is located on the top of the cylinder head. It is a small, metal piece with a ceramic insulator in the middle. The spark plug provides the electrical spark that ignites the fuel mixture.
Here are the steps on how to route the fuel lines on a Poulan 2075 chainsaw:
1. Remove the fuel tank cap.
2. Insert the fuel line into the fuel tank. The fuel line should be inserted into the hole in the bottom of the fuel tank.
3. Attach the fuel line to the carburetor. The fuel line should be attached to the nipple on the side of the carburetor.
4. Replace the fuel tank cap.
5. Start the saw and check for leaks. If there are any leaks, tighten the fuel line connections until the leaks stop.
