The McCulloch Eager Beaver blower requires a 50:1 fuel mixture of gasoline and 2-cycle oil. This means that for every 50 parts of gasoline, you will need to add 1 part of 2-cycle oil.
To mix the fuel, follow these steps:
1. Measure out the desired amount of gasoline and 2-cycle oil.
2. Pour the 2-cycle oil into the gasoline container.
3. Shake the container vigorously to mix the fuel and oil thoroughly.
IMPORTANT:
- Always use fresh fuel. Old fuel can clog the carburetor and cause the engine to run poorly.
- Never use E15 or E85 fuel in your Eager Beaver blower. These fuels can damage the engine.
NOTE: The fuel mixture ratio may vary slightly depending on the model of your Eager Beaver blower.
- Always refer to the owner's manual for specific instructions.
