Step 1: Locate the Override Switch
1. Open your car's driver-side door.
2. Look around the driver's footwell area, close to the hood release lever.
3. Identify the Override Switch, usually a small, red, or black button.
Step 2: Enable Override Mode
1. Press and hold the Override Switch continuously.
2. Turn the ignition key to the "ON" position while keeping the switch pressed.
3. Release the Override Switch after the car's door locks cycle and unlock (may take a few seconds).
Step 3: Turn Off the Alarm
1. Within 15 seconds of releasing the Override Switch, press and hold the Alarm Off button. This button is usually located on your driver's side door, often near the door lock switches.
2. Hold the Alarm Off button for a few seconds until the alarm indicator light turns off, indicating that the alarm has been disabled.
Step 4: Start the Engine
1. While holding the Alarm Off button, turn the key to the "START" position to start the engine.
Note: Be sure to consult your car's owner's manual or seek professional assistance if you're not comfortable with these steps. Additionally, this process may vary slightly based on the specific trim and features of your vehicle.
