- Socket wrench
- Spark plug socket
- Extension bar
- Ratchet
1. Open the hood of the car and locate the spark plugs. They are located on the top of the engine, near the front of the car.
2. Use the socket wrench and extension bar to loosen the spark plugs. Be careful not to drop the spark plugs into the engine.
3. Once the spark plugs are loosened, use the spark plug socket to remove them from the engine.
4. Inspect the spark plugs for wear or damage. If the spark plugs are worn or damaged, they will need to be replaced.
5. Install the new spark plugs in the reverse order of removal.
Here are some additional tips for removing spark plugs:
- Make sure the engine is cool before you start working on it.
- Be careful not to drop the spark plugs into the engine.
- If the spark plugs are tight, you may need to use a little bit of force to loosen them.
- Be careful not to over-tighten the spark plugs.
