The fuse box in a 1996 Jaguar Vanden Plas is located inside the engine compartment, on the passenger side. The fuse box is covered by a plastic cover that is held in place by two screws. To access the fuse box, simply remove the screws and lift off the cover.
Fuse Box Diagram
The diagram for the fuse box in a 1996 Jaguar Vanden Plas is located on the inside of the fuse box cover. The diagram identifies the location and purpose of each fuse in the box.
Fuse Replacement
If any of the fuses in the fuse box need to be replaced, it is important to use a fuse that is the same amperage as the original fuse. Using a fuse that is too high of amperage can damage the electrical system in your Jaguar.
When to Replace Fuses
Fuses typically need to be replaced if they have blown. A blown fuse will be black in color and may have a broken wire inside it. If you see a blown fuse, it is important to replace it as soon as possible to avoid any problems with the electrical system in your Jaguar.
Here are some tips for replacing fuses in a 1996 Jaguar Vanden Plas:
- Make sure that the engine is off and the ignition key is in the “OFF” position.
- Locate the fuse box inside the engine compartment, on the passenger side.
- Remove the screws that hold the fuse box cover in place and lift off the cover.
- Refer to the fuse box diagram on the inside of the cover to locate the fuse that needs to be replaced.
- Use a fuse puller to remove the blown fuse from the fuse box.
- Install a new fuse of the same amperage as the original fuse.
- Replace the fuse box cover and tighten the screws.
- Start the engine and check to make sure that the new fuse is working properly.
