* 10W-40 synthetic oil
Oil capacity:
* 6.5 quarts (6.2 liters)
How to change the oil:
1. Park your car on a level surface and turn off the engine.
2. Jack up the front of your car and secure it with jack stands.
3. Locate the oil drain plug on the bottom of the oil pan.
4. Place an oil drain pan under the drain plug and loosen the drain plug with a wrench.
5. Allow all of the oil to drain out of the oil pan.
6. Replace the oil drain plug and tighten it snugly.
7. Lower your car off of the jack stands.
8. Open the hood of your car and locate the oil filter.
9. Loosen the oil filter with an oil filter wrench and remove it.
10. Apply a thin coat of new oil to the gasket of the new oil filter.
11. Screw the new oil filter onto the oil filter housing and tighten it snugly.
12. Add the new oil to the oil pan.
13. Check the oil level on the dipstick and add more oil if necessary.
14. Start the engine and let it run for a few minutes.
15. Check for any leaks under the car.
