- Philips head screwdriver
- Flathead screwdriver
- Replacement headlight bulb
Instructions:
1. Open the hood of the car and remove the plastic cover on the back of the headlight housing.
2. Use the Philips head screwdriver to turn the locking screws for the headlight bulb socket counterclockwise until they are released.
3. Use the flathead screwdriver to pry the back of the headlight bulb socket out of the housing.
4. Remove the old light bulb from the socket by turning it counterclockwise.
5. Insert the replacement light bulb into the socket and turn it clockwise until it is secure.
6. Reinsert the light bulb socket into the housing and secure it using the locking screws.
7. Replace the plastic cover on the back of the headlight housing.
8. Repeat the process for the other headlight if needed.
