Auto >> AutoSPT >  >> Engine

Where do you check the hydraulic fluid in a Kubota L285 tractor?

To check the hydraulic fluid in a Kubota L285 tractor, follow these steps:

1. Locate the hydraulic fluid reservoir. It is a black plastic tank with a yellow cap located on the right side of the tractor, behind the seat.

2. Remove the yellow cap.

3. Use a dipstick to measure the fluid level. The dipstick is located inside the reservoir. The fluid level should be between the "FULL" and "ADD" marks on the dipstick.

4. If the fluid level is low, add hydraulic fluid to the reservoir until the level reaches the "FULL" mark.

5. Replace the yellow cap.

Note: It is important to use the correct type of hydraulic fluid for your tractor. The recommended fluid for the Kubota L285 tractor is Kubota Super UDT hydraulic fluid.