Hydraulic Oil Fill Port Plug: This is placed on the side of the machine, near the operator's seat. You can identify this by the marking on the plug; it shows the hydraulic oil representation.
Transmission Oil Dipstick and Fill Plug: This is placed on the rear part of the machine.
Steps In Refilling Hydraulic Fluid:
1. Locate the hydraulic oil fill plug. It is typically located on the side of the machine, near the top.
2. Remove the fill plug. Be careful, as there may be some pressure behind it.
3. Insert the funnel into the fill port.
4. Add hydraulic fluid until the level reaches the "full" mark on the dipstick.
5. Replace the fill plug and funnel.
