* A Phillips head screwdriver
* A flat head screwdriver
* A new heater control panel bulb
Instructions:
1. Turn off the engine and allow the vehicle to cool down.
2. Open the hood of the vehicle.
3. Locate the heater control panel. It is located in the center of the dashboard, just above the radio.
4. Use the Phillips head screwdriver to remove the two screws that hold the heater control panel in place.
5. Once the screws are removed, carefully pry the heater control panel out of the dashboard using the flat head screwdriver.
6. Disconnect the electrical connector from the back of the heater control panel.
7. Locate the burned-out bulb. It is usually located in the center of the heater control panel.
8. Use the flat head screwdriver to pry the old bulb out of its socket.
9. Insert the new bulb into the socket and turn it clockwise until it is secure.
10. Reconnect the electrical connector to the back of the heater control panel.
11. Carefully snap the heater control panel back into the dashboard.
12. Secure the heater control panel with the two screws that you removed earlier.
13. Close the hood of the vehicle.
The heater control panel bulb has now been changed.
