Step 1: Gather your materials.
You will need the following materials to convert your natural gas appliance to propane:
* A propane conversion kit
* A new propane regulator
* A propane hose
* A propane tank
* A pipe wrench
* A screwdriver
* A pair of pliers
* Safety goggles
* A fire extinguisher
Step 2: Turn off the gas supply.
Before you begin working on the appliance, turn off the gas supply. This can be done by turning the valve on the gas meter to the "off" position.
Step 3: Disconnect the natural gas line.
Use the pipe wrench to disconnect the natural gas line from the appliance. Be careful not to damage the gas line.
Step 4: Install the propane regulator.
Attach the propane regulator to the propane tank. Make sure that the regulator is properly tightened.
Step 5: Connect the propane hose.
Connect the propane hose to the propane regulator. Make sure that the hose is properly tightened.
Step 6: Connect the propane hose to the appliance.
Connect the propane hose to the appliance. Make sure that the hose is properly tightened.
Step 7: Turn on the gas supply.
Turn the valve on the gas meter to the "on" position. Check for leaks by spraying soapy water around the connections. If you see any bubbles, tighten the connection until the leak stops.
Step 8: Purge the air from the gas line.
Turn on the appliance and let it run for a few minutes. This will purge the air from the gas line.
Step 9: Adjust the burner.
Adjust the burner on the appliance so that it is burning properly.
Step 10: Test the appliance.
Test the appliance to make sure that it is working properly. If you have any problems, contact a qualified professional.
