- Socket wrench set
- Ratchet
- Feeler gauge
- Flathead screwdriver
- Screwdriver set
1. Remove the valve cover.
2. Locate the valve clearance adjustment screws. They are located on the top of the cylinder head, near the spark plugs.
3. Use the socket wrench set and ratchet to loosen the valve clearance adjustment screws.
4. Insert the feeler gauge between the valve stem and the rocker arm.
5. Tighten the valve clearance adjustment screw until the feeler gauge can no longer be inserted.
6. Repeat steps 3-5 for all of the valves.
7. Reinstall the valve cover.
