- Disconnect the battery.
- Remove the air filter box and hose.
- Remove the radiator.
- Remove the air conditioning compressor and condenser.
- Remove the accessory drive belt.
- Remove the power steering pump.
- Remove the exhaust system.
- Remove the fuel line.
- Remove the coolant lines.
- Remove the wiring harness.
- Remove the engine mounts.
- Remove the transmission.
- Remove the engine.
You will need to install the following parts from the 2.0 liter engine:
- Oil pan
- Oil filter
- Water pump
- Thermostat
- Fuel injector
- Intake manifold
- Exhaust manifold
- Starter motor
- Alternator
- A/C compressor
- Power steering pump
- Engine mounts
- Transmission
You will also need to replace the following fluids:
- Engine oil
- Coolant
- Transmission fluid
Once all of the parts are installed, you can reconnect the battery and start the engine.
