1. Disconnect the battery. This will prevent any electrical issues from occurring while you are working.
2. Remove the steering wheel. You will need to use a steering wheel puller to do this.
3. Remove the ignition switch cover. There are two screws that hold the cover in place.
4. Remove the lock cylinder. There are two screws that hold the lock cylinder in place.
5. Remove the ignition switch. There are four screws that hold the ignition switch in place.
6. Replace the ignition switch with a new one.
7. Reinstall the lock cylinder.
8. Reinstall the ignition switch cover.
9. Reinstall the steering wheel.
10. Reconnect the battery.
*Here are some additional tips for removing the ignition switch from a 1994 Ford Explorer without a key:*
* Make sure that you have the right tools for the job. You will need a steering wheel puller, a screwdriver, and a wrench.
* Be careful not to damage the steering wheel or the dashboard.
* If you are having trouble removing the ignition switch, you can take your vehicle to a mechanic.
