1. Gather Tools and Materials:
- New engine mount
- Jack and jack stands
- Socket set
- Wrench set
- Pliers
- Screwdriver
2. Prepare the Car:
- Park the car on a level surface and engage the parking brake.
- Turn off the engine and allow it to cool down.
- Disconnect the battery's negative terminal.
- Raise the front of the car using a jack and place jack stands to support it securely.
3. Locate the Engine Mount:
- On the 1997 Corolla, the front engine mount is located underneath the engine, connecting it to the front subframe.
4. Remove the Front Engine Mount Bolts:
- Use the socket set to remove the bolts securing the engine mount to the subframe.
- Be careful not to drop the bolts into the engine compartment.
5. Support the Engine:
- Use a block of wood or a hydraulic jack to support the engine from underneath. This will help prevent the engine from dropping when the mount is removed.
6. Remove the Old Engine Mount:
- Once the bolts are removed, use a pry bar to gently pry the old engine mount out of its position.
7. Install the New Engine Mount:
- Position the new engine mount in place, aligning it with the mounting holes on the subframe.
- Insert the bolts and tighten them securely.
8. Remove Support and Lower the Car:
- Carefully remove the support from under the engine.
- Lower the car using the jack and remove the jack stands.
9. Reconnect the Battery:
- Reconnect the battery's negative terminal.
10. Test Drive the Car:
- Start the engine and take the car for a short test drive. Listen for any unusual sounds or vibrations.
Remember, this process requires basic mechanical skills and safety precautions. If you're not comfortable performing the task, it's best to have the engine mount replaced by a professional mechanic.
