1. Turn off the engine and allow the vehicle to cool down. This is a safety precaution to avoid any potential accidents.
2. Open the fuel door. The fuel door is usually located on the rear quarter panel of the Miata. On most models, you can open it by pressing a button inside the car, or by using the key.
3. Unscrew the gas cap. Be careful not to drop the gas cap into the fuel tank.
4. Insert the fuel nozzle into the fuel tank. Make sure that the nozzle is fully inserted, so that it creates a seal with the fuel tank.
5. Squeeze the trigger on the fuel nozzle to start pumping gas. The gas will automatically stop flowing when the tank is full.
6. Replace the gas cap and close the fuel door. Be sure to tighten the gas cap securely to avoid any spills.
Here are some additional tips for putting gas in a Mazda Miata:
* If you are using a gas can, be sure to place it on the ground before filling it. This will help to prevent any spills.
* Do not smoke or use any other sources of ignition while you are putting gas in your vehicle.
* If you spill any gas, clean it up immediately. Gas is a flammable liquid and can be dangerous if it is spilled.
