Step 2: Locate the top console. It is the panel that runs along the top of the dashboard.
Step 3: Open the glove box. There are two release levers on the inside of the glove box, one on each side. Press both levers and pull the glove box down to open it.
Step 4: Locate the access panel for the light bulb. It is a small, rectangular panel located in the center of the glove box, just below the light bulb.
Step 5: Pry open the access panel. Use a flat-head screwdriver or other pry tool to pry open the access panel.
Step 6: Remove the old light bulb. Twist the old light bulb counterclockwise to remove it from the socket.
Step 7: Install the new light bulb. Twist the new light bulb clockwise into the socket until it is secure.
Step 8: Replace the access panel. Push the access panel back into place until it snaps shut.
Step 9: Close the glove box. Push the glove box up until it clicks into place.
