The camshaft sensor on the C5 Corvette is located on the front of the engine, just below the intake manifold. It is a small, cylindrical sensor with a black plastic connector. The sensor is held in place by a single bolt.
To remove the camshaft sensor, follow these steps:
1. Disconnect the electrical connector from the sensor.
2. Remove the bolt that holds the sensor in place.
3. Pull the sensor out of the engine.
To install the camshaft sensor, follow these steps:
1. Insert the sensor into the engine.
2. Install the bolt that holds the sensor in place.
3. Connect the electrical connector to the sensor.
Here are some additional tips for removing and installing the camshaft sensor:
* Be careful not to drop the bolt that holds the sensor in place.
* If the sensor is difficult to remove, you may need to use a penetrating oil to loosen it up.
* Make sure that the sensor is properly seated before installing the bolt.
* The sensor is a delicate piece of equipment, so be careful not to damage it.
If you have any questions about removing or installing the camshaft sensor on your C5 Corvette, please consult with a qualified mechanic.
