- Replacement fuel filter
- Adjustable wrench
- Screwdriver
- Rags
- Safety goggles
Instructions:
1. Remove the negative battery cable to disconnect the power to the fuel system.
2. Identify the fuel filter, which is usually located underneath the car near the fuel tank. It is a cylindrical-shaped object with two fuel lines connected to it.
3. Place a rag under the fuel filter to catch any spilled fuel.
4. Use the adjustable wrench to loosen the fuel line nuts on both ends of the fuel filter.
5. Disconnect the fuel lines by pulling them off of the fuel filter nipples. Be careful not to spill any fuel.
6. Remove the old fuel filter by unscrewing it from the fuel line fittings.
7. Inspect the old fuel filter for dirt or debris. If it is dirty, it is important to replace it with a new one.
8. Install the new fuel filter by screwing it into the fuel line fittings.
9. Re-connect the fuel lines to the fuel filter nipples and tighten the fuel line nuts.
10. Remove the rag and check for any leaks. If there are no leaks, reconnect the negative battery cable.
11. Start the car and let it run for a few minutes to ensure that the fuel filter is working properly.
