2. Loosen the fuel line clamps. There are two fuel line clamps that hold the fuel filter in place. Use a flat-head screwdriver to loosen these clamps.
3. Remove the fuel lines. Once the clamps are loosened, you can remove the fuel lines from the fuel filter. Be careful not to spill any fuel.
4. Remove the fuel filter. Once the fuel lines are removed, you can remove the fuel filter from its housing.
5. Install the new fuel filter. Insert the new fuel filter into the housing and reconnect the fuel lines. Tighten the fuel line clamps.
6. Start the engine and check for leaks. Start the engine and let it run for a few minutes. Check for any leaks from the fuel lines or the fuel filter.
You may also need a set of pliers and a jack to lift the vehicle if needed. Be sure to follow all safety precautions when working around fuel.
