* New headlight assembly (Make sure it is compatible with your Renault Clio model and year)
* Phillips screwdriver
* Flat-head screwdriver
* Socket wrench set
* Torx screwdriver
* 10 mm wrench
* 13 mm wrench
* Pliers
* Wire cutters
Step 2: Park your car in a safe and well-lit area.
Put the car in park, turn off the engine, and engage the parking brake. If possible, park on a level surface.
Step 3: Open the hood of your car.
Locate the hood release lever inside your car and pull it to release the hood. Prop up the hood using the support rod.
Step 4: Locate the old headlight assembly.
The headlight assembly is located in the front of the car, behind the plastic lens cover. There are two headlights, one on each side of the car.
Step 5: Disconnect the electrical connectors from the old headlight assembly.
Use a Phillips screwdriver to loosen the screws that hold the electrical connectors in place. Then, disconnect the connectors from the headlight assembly.
Step 6: Remove the old headlight assembly.
Use a socket wrench set to loosen the bolts that hold the headlight assembly in place. Then, carefully remove the old headlight assembly from the car.
Step 7: Install the new headlight assembly.
Carefully position the new headlight assembly into the opening in the car. Then, secure it in place with the bolts you removed in Step 6.
Step 8: Reconnect the electrical connectors.
Connect the electrical connectors to the new headlight assembly. Then, tighten the screws that hold the connectors in place.
Step 9: Close the hood of your car.
Lower the hood and close it securely.
Step 10: Test the new headlight.
Turn on the headlights and check that they are working properly.
