- Wrench set
- Socket set
- Screwdriver
- Pliers
- Safety glasses
Here are the steps to remove the starter:
1. Disconnect the battery. This is important to do to avoid any electrical shocks while you are working on the starter.
2. Remove the air cleaner. This will give you more room to work.
3. Locate the starter. The starter is located on the driver's side of the engine, near the bottom.
4. Remove the wires from the starter. There are two wires that connect to the starter: the positive wire (which is usually red) and the negative wire (which is usually black). Use a wrench to loosen the nuts that hold the wires in place and then disconnect the wires.
5. Remove the starter mounting bolts. There are two bolts that hold the starter in place. Use a wrench to loosen the bolts and then remove them.
6. Remove the starter from the car. Once the bolts are removed, you can pull the starter out of the car.
7. Inspect the starter. Once the starter is removed, you should inspect it for any damage. If there is any damage, you may need to replace the starter.
To reinstall the starter, simply follow these steps in reverse order.
