- 10mm spanner
- 13mm spanner
- ratchet
- extension bar
- T30 Torx bit
- pry bar
Step 1:
- Open the bonnet of the vehicle.
- Remove the plastic cover from the top of the wing
Step 2:
- Remove the two 13mm nuts securing the wing to the slam panel.
- Remove the two 10mm bolts securing the wing to the front bumper.
- Remove the T30 Torx bolt securing the wing to the A-pillar.
Step 3:
- Carefully pry the wing away from the body of the vehicle.
Step 4:
- Disconnect the electrical connectors for the side indicator and headlamp.
Step 5:
- Lift the wing off the vehicle.
