1. Open the hood.
Pull the hood release lever inside the car, and then lift the hood.
2. Remove the four bolts holding the headlamp assembly in place.
There are two bolts on the top of the headlamp assembly and two on the bottom. Use a 10mm socket wrench to remove the bolts.
3. Disconnect the electrical connector from the back of the headlamp assembly.
Press the release tab on the electrical connector and pull it straight out.
4. Remove the headlamp assembly from the car.
Once the bolts are removed and the electrical connector is disconnected, you can lift the headlamp assembly straight out of the car.
5. Repeat steps 2-4 for the other headlamp assembly.
To reinstall the headlamp assembly, simply follow these steps in reverse order.
Here are some additional tips for removing the headlamp assembly from a VW Polo 2003:
- Be careful not to drop the headlamp assembly when removing it from the car. The headlamp assembly is made of glass and can easily break if dropped.
- Make sure that the electrical connector is properly connected to the back of the headlamp assembly before reinstalling the headlamp assembly in the car. A loose electrical connection can cause the headlamp assembly to not work properly.
