1. Gather the necessary tools:
- Replacement brake light bulb
- Screwdriver
- Socket set
- Safety glasses
2. Prepare the vehicle:
- Park your Citroen Berlingo on a level surface.
- Turn off the engine and allow it to cool down.
- Engage the parking brake.
3. Locate the brake light assembly:
- Open the rear tailgate of your Citroen Berlingo.
- Locate the brake light assembly on the side that needs replacement.
4. Remove the brake light assembly:
- Use a screwdriver to remove the screws holding the brake light assembly in place.
- Carefully detach the brake light assembly from the vehicle.
5. Replace the brake light bulb:
- Twist the old brake light bulb counterclockwise to remove it from the assembly.
- Insert the new brake light bulb into the assembly and turn it clockwise until it is secure.
6. Reinstall the brake light assembly:
- Carefully align the brake light assembly with the vehicle and insert the screws.
- Tighten the screws using a screwdriver.
7. Test the brake light:
- Turn on the ignition and press the brake pedal to check if the new brake light is working properly.
8. Close the rear tailgate:
- Close the rear tailgate of your Citroen Berlingo.
Remember to dispose of the old brake light bulb properly, and recycle it if possible. These steps should help you replace the brake light on your Citroen Berlingo safely and effectively.
