- New side indicator bulb
- Flat-head screwdriver
- Phillips-head screwdriver
Step-by-step instructions:
1. Park the car on a level surface and turn off the engine.
2. Locate the side indicator that needs to be replaced.
3. Use the flat-head screwdriver to pry open the plastic cover of the side indicator housing.
4. Once the cover is open, you will see the side indicator bulb.
5. Use the Phillips-head screwdriver to loosen the screw that holds the bulb in place.
6. Carefully remove the old bulb from the housing.
7. Insert the new bulb into the housing and tighten the screw.
8. Replace the plastic cover of the side indicator housing.
9. Test the new side indicator to make sure it is working properly.
Additional tips:
- Be careful not to drop the small screws when you are removing and replacing the bulb.
- If you are replacing the side indicator bulb on the driver's side, you may need to remove the battery to access the bulb housing.
- If you have any questions about changing the side indicator bulb, you can consult your car's owner's manual or a qualified mechanic.
