* 4 turn signal lights (two for the front and two for the rear)
* 4 turn signal lenses (two amber for the front and two red for the rear)
* 4 turn signal sockets
* 1 turn signal switch
* 1 flasher relay
* Wiring
* Wire connectors
* Tools (screwdriver, wrench, wire cutters, etc.)
Instructions:
1. Disconnect the battery. This will prevent any electrical shock while you are working.
2. Mount the turn signal lights. The front turn signal lights should be mounted on the fenders, and the rear turn signal lights should be mounted on the body of the car.
3. Install the turn signal lenses. Snap the turn signal lenses into the turn signal lights.
4. Install the turn signal sockets. Screw the turn signal sockets into the back of the turn signal lights.
5. Connect the wiring. Connect the wiring from the turn signal switch to the turn signal lights and the flasher relay.
6. Install the turn signal switch. Mount the turn signal switch on the steering column.
7. Install the flasher relay. Mount the flasher relay in a convenient location under the dash.
8. Connect the battery. Reconnect the battery cable to the battery.
9. Test the turn signals. Turn on the turn signal switch and make sure that the turn signal lights flash.
Your 1937 Ford is now equipped with turn signals!
