* A Phillips head screwdriver
* A flat head screwdriver
* A socket wrench with a 10mm socket
* A pry bar
Step 1: Open the trunk of the car and remove the four plastic screws that hold the trunk lid liner in place.
Step 2: Use the pry bar to pry off the trunk lid liner.
Step 3: Locate the two 10mm bolts on each side of the rear bumper. Use the socket wrench to remove these bolts.
Step 4: Use the flat head screwdriver to pry off the plastic clips that hold the rear bumper in place. There are four clips on each side of the bumper.
Step 5: Once all of the clips have been removed, use the pry bar to pry the rear bumper off of the car.
Step 6: Disconnect the electrical connectors for the license plate lights and reverse lights.
Step 7: Remove the rear bumper from the car.
To reinstall the rear bumper, simply reverse the steps above.
