1. Park your motorcycle in a safe area and turn off the engine.
2. Locate the brake light switch. This is usually located on the right side of the motorcycle, near the brake lever.
3. Disconnect the brake light switch from the wiring harness.
4. Connect the extension brake light to the brake light switch. Make sure to match the positive and negative wires correctly.
5. Mount the extension brake light to the motorcycle.
6. Test the brake light to make sure it is working properly.
Here are some additional tips:
* Use a voltmeter to test the voltage at the brake light switch to make sure it is getting power.
* If the brake light is not working, check the fuses to make sure they are not blown.
* Make sure the brake light bulb is not burned out.
* If you are not comfortable working on your motorcycle's electrical system, take it to a qualified mechanic.
