2. Drain the old oil into an oil pan.
3. While the oil is draining, remove the oil filter. It is located on the right side of the engine.
4. Apply a thin coat of new oil to the gasket of the new oil filter.
5. Screw on the new oil filter until it is snug.
6. Replace the oil drain plug.
7. Add new oil to the bike by removing the oil filler cap and pouring in new oil. The bike takes approximately 0.8 litres of oil.
8. Replace the oil filler cap.
9. Start the bike and let it run for a few minutes.
10. Check the oil level to ensure that it is full.
