* A Phillips head screwdriver
* A T-25 Torx screwdriver
* A pry tool
* A wire stripper
Instructions:
1. Disconnect the negative battery terminal.
2. Remove the four screws that hold the radio surround in place.
3. Use the pry tool to pry the radio surround off of the dashboard.
4. Remove the two Torx screws that hold the radio in place.
5. Pull the radio out of the dash.
6. Disconnect the wiring harness from the back of the radio.
7. Use the wire stripper to remove the wire connectors from the wires.
8. Remove the radio from the vehicle.
To reinstall the radio, reverse the removal procedure.
Here are some additional tips for removing the radio:
* Be careful not to damage the dashboard or the radio surround when you pry it off of the dash.
* Make sure that you have all of the necessary tools before you start the job.
* If you are unsure about how to remove the radio, consult an expert.
