1. Park your car on a flat and level surface and apply the parking brake.
2.Locate the torsion bar adjuster bolt on the rear axle.
3. Use a 16mm spanner to loosen the two nuts that secure the adjuster bolt.
4. Use an Allen key to turn the adjuster bolt clockwise to increase the torsion bar tension, or counterclockwise to decrease it.
5. Tighten the two nuts to secure the adjuster bolt in position.
6. Repeat steps 3-5 on the other side of the vehicle.
7. Test drive the vehicle to ensure the suspension is properly adjusted.
Note: It is important to adjust both sides of the torsion bar evenly to maintain proper vehicle balance.
