1. Park your car on a flat surface and ensure the headlights are turned off.
2. Open the hood of your car and locate the headlight adjustment screws. There will be two screws for each headlight, one for vertical adjustment and one for horizontal adjustment.
3. Use the flathead screwdriver to turn the vertical adjustment screws clockwise to raise the headlight beam and counterclockwise to lower it.
4. Use the flathead screwdriver to turn the horizontal adjustment screws clockwise to move the headlight beam to the right and counterclockwise to move it to the left.
5. Measure the distance from the ground to the center of each headlight beam. The height of the headlight beams should be the same.
6. Repeat steps 3-5 until the headlights are adjusted properly.
Here are some additional tips for adjusting your headlights:
- Make sure that the car is on a level surface when you adjust the headlights.
- Do not adjust the headlights too high, as this can be dangerous for oncoming drivers.
- If you have any questions about how to adjust the headlights, consult your owner's manual or a qualified mechanic.
