- A flat-head screwdriver
- A Phillips-head screwdriver
- A Torx T20 screwdriver
- A new headlight bulb (H7)
1. Open the hood of the car.
2. Locate the headlight assembly. It is located at the front of the car, behind the bumper.
3. Remove the plastic cover over the headlight assembly. There are four plastic clips that hold it in place. You can use a flat-head screwdriver to pry them up.
4. Remove the three Phillips-head screws that hold the headlight assembly in place.
5. Pull the headlight assembly out of the car. Be careful not to drop it.
6. Remove the old headlight bulb. It is held in place by a metal clip. You can use a flat-head screwdriver to pry it up.
7. Insert the new headlight bulb. Make sure that it is properly seated in the socket.
8. Replace the metal clip.
9. Replace the headlight assembly into the car.
10. Replace the three Phillips-head screws.
11. Replace the plastic cover over the headlight assembly.
12. Close the hood of the car.
